Aston Martin Car Door LOGO Welcome Lights LED Door Projector Light

Specification:
100% new and super brightness LED light
Voltage: 12V
Output power: 5W
Lamp type: Philips LED
Material: ABS + Aluminum alloy

Package list:
2 PCS Door Logo Projector Lights

Note:
You need to order 2 pair if you would like to install the car door logo projector lights for your 4 car doors.
If you not sure the car model, or you want to customize other style of car logo lights, please contact the customer service, thanks!

Installation instructions:
Install the special door logo lights:
1.Use a flat-head screwdriver to remove and disconnect the original door step lights;
2.Plug in new door lights with correspondent connector;
3.Done! LOGO should be projected on the ground.
Install the general purpose door lights:
1.First test if the received projection lamp can work normally.
2.Remove the car door panel.
3.Find the correct position and drill with a punch.
4.Install the logo projector light. Tighten the screw to fix the logo projector light, and then connect the positive and negative terminals to the wires that controls the door switch.
5.Check if it is installed correctly. Does the lamp work properly? Whether the projected logo direction is what you want.
6.Install the car door panel back to its original position. All is perfect!

Medo pictures: